My project area sits on a long south facing slope and is a
roughly rectangular shape measuring 900 by 800 feet. The area is currently a patchwork mix of
large Eastern Red Cedars, mixed hardwoods, and barrens openings. I began work at the east property line and
worked my way west in a series of strips paralleling the fence line. Each strip
ran from the creek up to the hill top, an elevation difference of about 140
feet. The neighboring property has a
growing population of invasives and birds bring plenty of seeds across the
property line. Invasive shrubs were especially prevalent within 100 feet of the fence.
To make my search as thorough as possible, I produced a grid
pattern by using marking flags to establish the strips and to show the corners
of each cell within the strip. Strips
were about 20 feet wide and each cell was about 35 feet long. This resulted in around 1,000 cells developed
within the project area. I began by
establishing two strips using three lines of flags; one red, one blue, and one
yellow. As I completed each strip, I
would move the line of flags west to make a new strip. Within each cell I would walk a line about three
feet in from the side, cross over at the end and walk about three feet in along
the other side, and then travel up the center until I reached the next
cell. There’s no place within that 16
acres that I wasn’t within a few feet of while searching. Every invasive shrub found was cut off at
ground level and the resulting stump treated with glyphosate. Most of the treated individuals were less
than two feet tall. If I could see it, I
would treat it.
Of course, that doesn’t mean I found every invasive shrub
there was to find. Surrounding native
vegetation often hid the invaders.
Dappled sunlight could also be effective camouflage. Despite these obstacles, I drastically
reduced the number of unwelcome shrubs.
Even shrubs that appear impossible to miss can be hidden
from view. This Bush Honeysuckle could
not be seen from the other side of the tree.
The concentration of invasives was greatest beneath trees
used by roosting or resting birds. The
photo above shows an Autumn Olive, a Bush Honeysuckle and a Multi-flora Rose,
three of a larger collection of similar specimens all inhabiting the same small
area of ground.
The cause of the infestation was a large Sycamore, the trunk
of which can be seen here in the background.
Flocks of Robins and Cedar Waxwings seem to spend considerable time in
the upper branches of towering Sycamores, often after making a large meal of
fruits from surrounding shrubs. While
resting, they are also dropping seeds into the fertile soil beneath the tree.
It’s common to find a clump of seedlings that has developed
on the site of a seed filled bird dropping.
This jungle of Autumn Olive seedlings resulted from a single bird
drop.
The seedlings must now compete among themselves for
survival. The plants at the edge of the
cluster stretch out to capture sunlight.
The clump may appear to be spread over a rather wide space,
but clipping the tops reveals that all stems are originating from a single
small spot.
Invasives were cut and treated in this area in a slightly
less intensive search conducted four years ago.
These two Bush Honeysuckle stems and the stump from which they were cut
are a result of that management effort.
I was concerned when I found many Bush Honeysuckle seedlings growing in
a roughly 10 foot diameter circle centered around the dead stump. Could seeds from fruit that fell uneaten to
the ground germinate after several years of natural stratification? If so, this could cause another complication
in the battle to control these invasives.
Hopefully, this is just the result of some seed laden birds that just
happened to roost above this old bush site.
Multiflora Rose growing on the dry, rocky slopes show an
interesting growth pattern. Most have
been growing for many years as indicated by the thick stump found at ground
level, but the plants display only the current year’s growth. Dieback due to harsh conditions seems to be a
perennial problem for these roses. That
doesn’t stop them from trying anew each year.
The plant shown above has one live stem produced this year, one dead
stem produced last year, and numerous scars on the stump from previous years.
Multiflora Roses also have a habit of sending out a
horizontal stem that stays hidden from view.
Cutting and applying herbicide above this branch could cause the
treatment to fail and the rose to survive.
The horizontal branches also have the annoying habit of rooting at the
leaf nodes so that a series of individual plants develops along the length of
the stem.
I know the property will never be completely free of
invasive plants, but it would be nice to reach a point where I could walk around
without having their presence so obviously displayed everywhere I look. As my supply of non-native invasive shrubs
dwindles, the populations on neighboring properties is expanding, so new seeds
will always be finding their way across the fence. At one point during my work, I was thinking
of one of my favorite books, The Day of the Triffids by John Wyndham. I didn’t realize it when I read the book for
the first time nearly 50 years ago, that the story is basically about a
non-native invasive plant species that swarms over the countryside wreaking
havoc on the human population. At one
point in the book, Triffids crowded outside barrier fences while the people
inside hunted and destroyed any invading seedlings. It was the scene just outside my fence line
that brought that book to mind. Of
course, the invasive plants that I’m dealing with can’t walk and they’re not
going to strike me dead if I exhibit a moment of carelessness. That’s something I can be grateful for as I
continue my work.
I was wondering where you'd been off to, sounds like you've been more than busy. What a job, it makes me a little embarrassed to think of how I can't even get a small knotweed patch eliminated. You've inspired me to get serious.
ReplyDeleteHi, Frank. From what I've seen on your blog, you seem to be plenty busy yourself.
Delete